2024 LIUGONG 838HV WHEEL LOADER
2024 LIUGONG 838HV WHEEL LOADER FOR SALE. UNIT IS EQUIPPED WITH A TIER 4 FINAL CUMMINS ENGINE, 3RD VALVE, HYDRAULIC QUICK COUPLER, RIDE CONTROL, REVERSING FAN, AND LIUGONG 3 YEAR/4000 HR FULL MACHINE WARRANTY. FORKS ALSO AVAILBILE.
MACHINE SPECIFACATIONS:
ENGINE | HYDRAULIC SYSTEM | |||||||||||||||
Emissions rating | EPA Tier 4 Final / EU Stage V | Main pump type | Piston | |||||||||||||
Make | Cummins | System pressure | 3,771 psi (26 MPa) | |||||||||||||
Model | B4.5 | Raise | 4.8 s | |||||||||||||
Gross power | 154 hp (115 kW) @ 2,200 rpm | |||||||||||||||
Dump time | 1.5 s | |||||||||||||||
Net power | 142 hp (106 kW) @ 2,200 rpm | |||||||||||||||
Float down time | 3.1 s | |||||||||||||||
Peak torque | 525 lbf·ft (712 N·m) @ 1,200 rpm | |||||||||||||||
Total cycle time | 9.4 s | |||||||||||||||
Cylinders | 4 | |||||||||||||||
BUCKET PERFORMANCE | ||||||||||||||||
Displacement | 1.18 gal (4.5 L) | |||||||||||||||
Bucket capacity | 2.35-5.2 yd3 (1.8-4.0 m3) | |||||||||||||||
Aspiration | Turbocharged & Air-to-air intercooled |
|||||||||||||||
TIRES | ||||||||||||||||
TRANSMISSION | Tire size | 20.5R25 L3 | ||||||||||||||
Transmission type | Countershaft, power shift | |||||||||||||||
OPERATING WEIGHT | ||||||||||||||||
Torque converter | Single stage, three elements | |||||||||||||||
Operating weight | 29,033 lb (13,169 kg) | |||||||||||||||
Max. travel speed, fwd | 24.9 mph (40 km/h) | |||||||||||||||
Max. travel speed, rev | 17 mph (27.3 km/h) | SERVICE CAPACITY | ||||||||||||||
Fuel tank | 57.3 gal (217 L) | |||||||||||||||
Number of speeds, fwd | 4 | |||||||||||||||
Number of speeds, rev | 3 | Engine oil | 3 gal (11.6 L) | |||||||||||||
Cooling system | 7.4 gal (28 L) | |||||||||||||||
AXLES | ||||||||||||||||
Hydraulic system | 33 gal (125 L) | |||||||||||||||
Differential front type | Limited slip | |||||||||||||||
Transmission | 10.5 gal (40 L) | |||||||||||||||
Differential rear type | Limited slip | |||||||||||||||
Axles, each | 9 gal (34 L) | |||||||||||||||
Axle oscillation | ±12° | |||||||||||||||
DEF tank | 5 gal (19 L) | |||||||||||||||
STEERING | ||||||||||||||||
Steering configuration | Articulated | |||||||||||||||
Steering pressure | 2,611 psi (18 Mpa) | |||||||||||||||
BRAKES | ||||||||||||||||
Service brake type | Wet disc brake | |||||||||||||||
Service brake actuation | Fully hydraulic | |||||||||||||||
Parking brake type | Drum | |||||||||||||||
Parking brake actuation | Electro-hydraulic release |
LOADER ARM PERFORMANCE WITH ATTACHMENT | ||||||||||||||
Description | ||||||||||||||
Tipping load – straight | 19,610 lb (8,895 kg) | |||||||||||||
Tipping load – full turn | 16,552 lb (7,508 kg) | |||||||||||||
Bucket breakout force | 17,985 lbf (80 kN) | |||||||||||||
A Maximum hinge pin height | 12 ft 5 in (3,788 mm) | |||||||||||||
B Dump clearence at full height discharge | 9 ft 4 in (2,850 mm) | |||||||||||||
C Dump reach at full height discharge | 4 ft 1 in (1,250 mm) | |||||||||||||
D Max. digging depth, bucket level | 0.8 in (20 mm) | |||||||||||||
S1 Bucket rollback at ground level | 42° | |||||||||||||
S2 Bucket rollback at carry | 49° | |||||||||||||
S3 Bucket rollback at max. height | 56° | |||||||||||||
S4 Max. dump angle at full height | 45° |
DIMENSIONS | ||||||||||||||||
Description | ||||||||||||||||
E Ground clearance | 1 ft 6 in (450 mm) | |||||||||||||||
G Wheelbase | 9 ft 7 in (2,940 mm) | |||||||||||||||
H Cab height | 11 ft 2 in (3,420 mm) | |||||||||||||||
J Wheel tread | 6 ft 1 in (1,850 mm) | |||||||||||||||
K Width over tires | 7 ft 10 in (2,370 mm) | |||||||||||||||
L Length with bucket down | 24 ft 10 in (7,570 mm) | |||||||||||||||
M Turn angle, either side | 40° | |||||||||||||||
P Rear angle of departure | 31° | |||||||||||||||
R4 Turning radius, bucket carry | 19 ft 1 in (5,807 mm) | |||||||||||||||
R2 Turning radius, outside of tire | 17 ft 6 in (5,320 mm) | |||||||||||||||
W Width over bucket | 8 ft 1 in (2,460 mm) | |||||||||||||||