2008 Deere 872D Motor Grader-(SOLD)

2008 DEERE 872D MOTOR GRADER WITH ONLY 5000 ORIGINAL HOURS! IT HAS EROPS WITH HEAT/AC, LOW PROFILE CAB, ALL WHEEL DRIVE, 14FT MB, MS RIPPER/SCARIFIER, TIER 3 DEERE ENGINE, BRAND NEW 20X20.5 TIRES, DEERE MAINTAINED ITS ENTIRE LIFE! VERY TIGHT MACHINE.

Hours: 5,000

Location: Placerville, CA 95667

Engine
Make John Deere
Model 6081H
Net Power Gear 1-2 205 hp 153 kw
Net Power Gear 3-4 230 hp 172 kw
Power Measured @ 2000 rpm
Net Power Gear 5-6 245 hp 182.7 kw
Torque Measured @ 1000 rpm
Number of Cylinders 6
Net Power Gears 7-8 235 hp 175.2 kw
Max Power 245 hp 182.7 kw
Net Torque Gears 1-2 793 lb ft 1075 Nm
Net Torque Gears 3-4 835 lb ft 1132 Nm
Net Torque Gears 5-6 872 lb ft 1182 Nm
Net Torque Gears 7-8 942 lb ft 1277 Nm
Displacement 494 cu in 8.1 L
Aspiration Turbocharged with air-to-air after cooler
Operational
Std Operation Weight – Front Axle 10170 lb 4613 kg
Std Operation Weight – Rear Axle 26040 lb 11812 kg
Std Operation Weight – Total 36210 lb 16421 kg
Max Operation Weight – Front Axle 16023.2 lb 7268 kg
Max Operation Weight – Rear Axle 32577.7 lb 14777 kg
Max Operation Weight – Total 48600.9 lb 22045 kg
Fuel Capacity 106 gal 401.2 L
Cooling System Fluid Capacity 13 gal 49.2 L
Hydrauilc System Fluid Capacity 14 gal 53 L
Transmission Fluid Capacity 6 gal 22.7 L
Rear Diff/Final Drive Fluid Capacity 9.5 gal 36 L
Circle Gearbox Fluid Capacity 1.5 gal 5.7 L
Tandem Case Fluid Capacity (each) 20 gal 75.7 L
Tire Size 17.5R25 Radial PR
Operating Voltage 24 V
Alternator Supplied Amperage 100 amps
Transmission
Type Powershift with direct drive
Number of Gears – Forward 8
Number of Gears – Reverse 8
Max Speed – Forward 25.5 mph 41.1 km/h
Max Speed – Reverse 25.5 mph 41.1 km/h
Steering
Articulation L/R 22 degrees
Turning Radius 23.5 ft in 7.2 m
Front Axle
Wheel Lean 20 degrees
Oscillation – Total 32 degrees
Ground Clearance 1.9 ft in 587 mm
Hydraulic System
Pump Type Variable-displacement piston
Pump Flow 54.7 gal/min 207 L/min
Relief Valve Pressure 2750 psi 18960.6 kPa
Moldboard
Moldboard Width 14.1 ft in 4300 mm
Moldboard Height 27 in 686 mm
Moldboard Thickness 0.98 in 25 mm
Side Shift Left 26.8 in 680 mm
Side Shift Right 26.8 in 680 mm
Blade Pull at Max Weight 43760 lb 19849 kg
Circle
Diameter 59.8 in 1520 mm
Rotation 360 degrees
Shift Left 31 in 787 mm
Shift Right 28.5 in 724 mm
Max Reach Outside Tires – Left 91.3 in 2320 mm
Max Reach Outside Tires – Right 90.9 in 2310 mm
Max Lift Above Ground 17.2 in 437 mm
Blade Tip Angle – Front 42 degrees
Blade Tip Angle – Rear 5 degrees
Dimensions
Height to Top of Cab 10.4 ft in 3180 mm
Overall Length 28.9 ft in 8804 mm
Width Over Tires 8.7 ft in 2640 mm
Wheelbase 20.1 ft in 6120 mm
Blade Base 8.3 ft in 2533 mm
Tandem Axle Wheelbase 5.1 ft in 1540 mm
Front Ground Clearance 1.9 ft in 587 mm